eProcurement Toolkit

You are here: sourcing, stop 1/7

The lineStrategic sourcing

How do sourcing and category management work together?

Short answer

Category management decides what a category needs and when to go to market; sourcing runs each of those decisions as a project and hands back a contract to manage.

Cite this answereProcurement Toolkit, “How do sourcing and category management work together?”, updated 13 Nov 2026, eprocurementtoolkit.org/strategic-sourcing/sourcing-and-category-management

Key takeaways

  • Category management owns a category for years and decides which contracts to renew, merge or retender, and when. Sourcing runs each of those decisions as a project that ends with a signed contract.
  • On a sourcing project, the category manager decides whether to go to market, the scope and the targets; the sourcing lead decides how the event runs and keeps it fair; the business defines the need.
  • A category plan turns the strategy into waves: groups of contracts taken to market together, ordered by contract end dates, value, risk and readiness.
  • Two hand-offs carry the value: a sourcing brief into the project and an award pack out of it. Most losses happen in the second one, when the new contract is signed but never used.
  • Public bodies make the same link visible: UK category plans feed the pipeline notice that large contracting authorities must publish each year.

How do sourcing and category management work together?

Sourcing and category management are two layers of one job. Category management owns a category, such as IT hardware, for years: it sets the strategy and decides which contracts to renew, merge or retender, and when. Sourcing runs each decision as a project, from market research to signed contract.

The work goes round in a loop. The category strategy produces a plan. The plan starts sourcing projects. Each project returns a contract, which the category manager then manages. The data from that contract, such as prices paid, volumes and supplier performance, goes back into the next strategy. For example, an IT category manager decides to buy laptops and monitors in one tender next spring instead of two. A sourcing lead runs the request for proposal, the contract is signed, and the category manager then checks that departments order from it and that prices hold.

Why category management is the permanent frame and strategic sourcing the project inside it is explained in what is category management. This page is about the joins between them: who decides what, how a strategy becomes a calendar of sourcing projects, and what passes from one to the other.

Who decides what when a category is sourced?

On each sourcing project, decisions split between three groups. The category manager decides what the project must achieve for the category. The sourcing lead, often a buyer or sourcing specialist, decides how the event runs and keeps it fair. The business users define the need and judge the service part of the offers. The table shows a common split; each organisation writes its own.

A common split of decisions on one sourcing project (illustration; each organisation sets its own)
DecisionCategory managerSourcing leadBusiness users
Whether and when to go to marketDecides, from the category plan and the contract end dateAdvises on lead time and team workloadConfirm the need still exists
Scope and lots (what goes into the tender)Decides, to fit the category strategyProposes lots that suppliers can answerAgree what is in and out
Requirements and specificationChecks they follow the strategy, such as fewer modelsTurns them into the request documentWrite and sign off the need
Route to market: RFQ, RFP, reverse auction or call-off from a frameworkAgreesDecides and runs itInformed
Evaluation criteria and weightsAgrees them before the request goes outDrafts and applies themScore the technical and service parts
NegotiationSets the targets and the limitsLeadsJoin on technical and service points
Award recommendationEndorsesWrites it, with the scoresEndorse
Moving orders to the new contractOwnsHands over prices and supplier dataChange how they order

The category manager owns the reason to buy and what success looks like; the sourcing lead owns the fairness and the mechanics of the event.

In a small team, one person holds both roles. The split is still useful on paper: write down the reason for the project and the targets before writing the request to suppliers. A tender whose purpose is written afterwards tends to repeat the last contract. The full list of roles in a category team, and how category strategies are approved, is in how do you set up category management in procurement.

How does a category strategy turn into sourcing waves?

A category strategy covers several years; a category plan says what happens and when. UK central government’s commercial standard, GovS 008, puts the difference in two lines: a category strategy “defines the overall approach to managing the category”, and a category plan “defines how the category strategy should be delivered”. In practice, the heart of the plan is a calendar of sourcing projects, often grouped in waves: sets of contracts taken to market in the same period.

Four inputs decide which project goes in which wave:

  • Contract end dates. List every contract in the category with its end date and any extension options. The end date, minus the time the project needs, is the latest date to start.
  • Value. The spend and the price gaps found in the spend analysis. A large contract with prices above the market moves up the list.
  • Risk and business events. A supplier in financial trouble, a new site, a product launch or a change in law can force a project earlier than its end date.
  • Readiness. The need is known, the users can give time, and the data is clean enough to set a baseline, the starting cost against which savings are measured.

Count back from the contract end date. The project needs time to prepare, time for suppliers to answer, time to evaluate and approve, and time to move orders to the new contract. Public buyers also have legal minimum periods. Under the EU directive, an open procedure gives suppliers at least 35 days from the contract notice, with shorter periods in defined cases. Under the US Federal Acquisition Regulation, bids or proposals above the simplified acquisition threshold get at least 30 days, except for commercial products and services.

Waves also spread the team’s workload. If five large contracts end in the same quarter, a plan can use an extension option on one contract, or end another early, so that the events do not all land at once. It can also align two contracts that share a supply market, so that suppliers see one larger lot instead of two small ones.

What does a category plan with sourcing waves look like?

A fictional regional public body has a facilities category worth about €6.2 million a year across seven contracts. The category manager writes the plan in November 2026. The table shows each contract, what the strategy decides for it, and the wave it joins.

Facilities category plan of a fictional public body, written November 2026 (all figures fictional)
ContractSpend per year (€)EndsDecision in the strategyWave
Waste and recycling300,000March 2027Call off from an existing regional framework, no new tenderWave 1, start December 2026
Security guarding1,100,000June 2027Retender; ask for remote monitoring as an optionWave 1, start January 2027
Building maintenance, planned and reactive1,800,000September 2027Retender as one contract with service levelsWave 1, start February 2027
Cleaning, three regional sites600,000June 2027, one 12-month extension optionUse the extension to end in June 2028Wave 2
Cleaning, head office1,400,000March 2028Tender together with regional cleaning: one event, two lotsWave 2, start September 2027
Pest control and small services300,000Rolling, no end dateBuy through the new maintenance contract’s catalogueWave 2
Catering700,000August 2029Keep; review service levels each yearNo project before 2029

Wave 1 follows the end dates; wave 2 exists because one extension option lets both cleaning contracts go to market as a single, larger event.

Three projects run in wave 1, but they start a month apart, so the sourcing team is not writing three requests at once. The waste contract ends too soon for a full tender, so the plan uses a framework agreement that already exists. In EU public procurement, a framework can run for up to four years in most cases, and orders under it follow its terms or a mini-competition among its suppliers. Wave 2 gives cleaning suppliers one event worth about €2 million a year, split into two lots so that regional firms can still bid.

Each line of the table becomes a sourcing project with its own lead, dates and brief. The steps inside each project are the same seven steps described in the strategic sourcing process.

What passes between the category manager and the sourcing lead?

Two documents carry the work across: a brief into the project, and an award pack out of it. Their names change between organisations; their content does not.

Sourcing brief (into the project)
The scope and the lots, the spend baseline and how it was calculated, the users and their needs, the approach the strategy chose (for example fewer suppliers or a longer contract), the targets, the known risks, the key dates and who must approve the award. For the security tender in the example, the brief says the strategy wants one supplier for all sites and asks for remote monitoring priced as an option.
Award pack (out of the project)
The signed contract, the prices in a form the ordering system can load, the evaluation record, the savings calculated against the agreed baseline, supplier contacts, service levels and review dates, and what the market showed: the range of prices offered, new suppliers, and capacity limits.

Value is most often lost in the second hand-off. The contract is signed and filed, but its prices never reach the catalogue, so people keep ordering from the old supplier. The sourcing lead has moved to the next project; nobody owns the move. In the split above, the category manager owns it, with the procure-to-pay team, who set up the supplier and prices for ordering. The obligations in the contract, such as service levels and price reviews, then pass to contract management.

Market knowledge should flow back too. The offers in a tender are one of the best views of a market a category manager will get: real prices, real capacity and suppliers the team had not met. Recording them in the category strategy, rather than leaving them in the tender file, makes the next plan better.

How are sourcing and category teams organised?

Organisations split the work in three common ways. The choice depends on how many sourcing events run each year, how complex they are, and how much each category depends on deep market knowledge.

Three common ways to organise sourcing and category management
ModelHow it worksFits whenWatch for
Category managers run their own sourcingThe category manager writes the strategy and runs each tenderFew, complex events per category, where market knowledge matters mostStrategy work stops while a large tender runs
Category managers plus a shared sourcing teamCategory managers own strategies; a team of sourcing specialists runs events for all categoriesMany events, standard procedures, public rules to apply the same way each timeMore hand-offs; specialists may not know the market
Sourcing without category ownersBuyers source each need as it comes, usually when a contract endsSmall spend with few repeat categoriesNobody plans across contracts; the same market is tendered several times a year

Whatever the model, each category needs one named owner and each sourcing project one named lead.

Moving from the third model to the first two is what setting up category management means in practice. The order of that move, starting with a few categories, is described in how do you set up category management in procurement. Training that covers both disciplines is compared in category management courses.

How do public bodies link category plans and sourcing?

Public rules make the link between plans and sourcing visible. In UK central government, GovS 008 says an organisation “can segregate its third-party spend into categories and may appoint category experts”, and describes a commercial pipeline that “provides an ongoing view of commercial activity”. Under section 93 of the Procurement Act 2023, a contracting authority that expects to pay more than £100 million under relevant contracts in the coming financial year must publish a pipeline notice within 56 days of the start of that year. The notice lists the contracts above £2 million it intends to advertise in the next 18 months. A category plan with dated waves is the natural source for that list.

The UK Sourcing Playbook adds steps that sit between the category plan and the tender. Central government bodies must apply it when they outsource, insource or reprocure services. It asks for an early assessment of the health and capability of the market, and a should-cost model, an estimate of what the service ought to cost, for complex outsourcing projects.

In the US federal government, OMB memorandum M-19-13 defines category management as “buying common goods and services as an enterprise” to remove duplication and deliver more value. It names category managers, the owners of shared government-wide contracts, and the agency officials who decide how to meet each need, and it asks agencies to analyse alternatives for certain planned purchases of common goods and services. For an agency, the first sourcing decision is often whether an existing government-wide contract meets the need before running a new procurement. How public procedures work is explained in what is public procurement.

Where does the link between sourcing and category management break?

  • The strategy is written after the tender. The category strategy is drafted to justify an event already running, so it cannot change the scope or the approach.
  • Nobody knows the end dates. There is no contract register, and a renewal is discovered when the supplier sends a price increase or the contract renews by itself.
  • The brief has no baseline. Savings are argued about after the award because the starting cost was never agreed with finance.
  • The award pack is not used. The new prices are not loaded and orders keep going to the old supplier.
  • Market knowledge stays in the tender file. Prices offered, new suppliers and capacity limits are never written into the category strategy.
  • Every project lands in the same quarter. The plan follows end dates only, and the team runs too many events at once, each with less care.

Each of these is a missing hand-off rather than a missing skill. A contract register, a one-page brief and a one-page award pack fix most of them, whatever software the team uses.

Questions

Is sourcing part of category management?

In most organisations, yes. Category management is the ongoing frame for a category, and sourcing projects are the main tool it uses to change suppliers, prices and terms. Sourcing also happens without category management, for example a one-off purchase, but then nobody plans across contracts.

What is a sourcing wave?

A sourcing wave is a group of sourcing projects run in the same period, usually because their contracts end around the same time or share a supply market. Waves help a team spread its workload and give suppliers larger, combined lots to bid for.

Should the category manager or a sourcing specialist lead the tender?

Both work. A category manager leading the tender brings market knowledge but has less time for strategy. A sourcing specialist brings method and consistency, which matters under public rules, but needs a clear brief. Many teams use specialists for large or regulated events and let category managers run smaller ones.

How long before a contract ends should sourcing start?

There is no single rule. Count back from the end date: preparation, the supplier response period, evaluation, approvals and the move to the new contract. A simple category may need weeks; a complex service under public rules often needs many months. An extension option, where one exists, gives extra time.

Which software supports sourcing and category management?

Category plans and contract registers often start in spreadsheets. Category management tools add strategy templates and market analysis, and e-sourcing tools run the events. The options are compared in category management tools and strategic sourcing software.

New guides on the strategic sourcing line

One short email when a guide on this line is added or revised. Nothing else.

Coming soon: sign-up opens with the first email.

Seb Troz

Source-to-pay consultant · written and maintained this guide

Seb Troz is a source-to-pay consultant who implements Ivalua for buying organisations. He writes the guides on eProcurement Toolkit from that hands-on work.

Disclosure: the author works as an Ivalua consultant. Pages that compare software say so next to the comparison.